Fixed Angle Blocks

Fixed Angle Blocks

With additional fixed angle blocks, different sharpening angles can be achieved with the CORE system. In combination with a PRO shaft, they can also be used on the PRO system.

Only the fixed angle block is included in the delivery. If a specific angle is used frequently, we recommend ordering an additional magnetic holder and a shaft. This allows the angle to be changed quickly by simply swapping the guide rods on the system, without the need to turn any screws.

Available Angles: 10°, 12.5°, 15°, 17.5°, 20°, 22.5°, 25°, 27.5°, 30°

Assembly: To be used, the fixed angle blocks must be screwed together with the shaft and magnetic holder. A 2 mm and a 3 mm hex key (Allen wrench) are required for this. First, the shaft is inserted from above and then secured from below using the M3 screw. Next, the hex nut on the magnetic holder can be pressed into the corresponding pocket and then tightened from above with the M5 screw.